prikaz prve stranice dokumenta Procjena volumena kalupa za izradu boca
No public access
master's thesis
Procjena volumena kalupa za izradu boca
2024. urn:nbn:hr:168:938385
Marinac, Valentin
University of Zagreb
Faculty of Electrical Engineering and Computing

Cite this document

Marinac, V. (2024). Procjena volumena kalupa za izradu boca (Master's thesis). Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing. Retrieved from https://urn.nsk.hr/urn:nbn:hr:168:938385

Marinac, Valentin. "Procjena volumena kalupa za izradu boca." Master's thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2024. https://urn.nsk.hr/urn:nbn:hr:168:938385

Marinac, Valentin. "Procjena volumena kalupa za izradu boca." Master's thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2024. https://urn.nsk.hr/urn:nbn:hr:168:938385

Marinac, V. (2024). 'Procjena volumena kalupa za izradu boca', Master's thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, accessed 14 January 2025, https://urn.nsk.hr/urn:nbn:hr:168:938385

Marinac V. Procjena volumena kalupa za izradu boca [Master's thesis]. Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing; 2024 [cited 2025 January 14] Available at: https://urn.nsk.hr/urn:nbn:hr:168:938385

V. Marinac, "Procjena volumena kalupa za izradu boca", Master's thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, Zagreb, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:168:938385

Please login to the repository to save this object to your list.
Metadata
TitleProcjena volumena kalupa za izradu boca
Title (english)On estimating bottle mould volume
AuthorValentin Marinac
MentorTomislav Pribanić (mentor)
Committee memberTomislav Petković (predsjednik povjerenstva)
Committee memberMarko Subašić (član povjerenstva)
Committee memberJuraj Petrović (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Electrical Engineering and Computing
Zagreb
Defense date and country2024-09-13, Croatia
Abstract
U ovom radu se fotogrametrijski procjenjuje volumen metalnog kalupa za izradu staklenih boca. Za 3D rekonstrukciju površine kalupa korišteno je nekoliko različitih metoda, kamera i senzora. Radi metalne površine kalupa i problema koji to predstavlja nekim metodama 3D rekonstrukcije površine, kalup je bio obojan bijelom bojom. Bojanje kalupa je omogućilo proces 3D rekonstrukcije površine te posljedično i procjenu volumena. Volumen kalupa se aproksimirao sumom manjih volumena. Najtočnija metoda je imala više od 1 mL greške, a najnetočnija je imala više od 20 mL greške.
Abstract (english)
In this thesis, the volume of a metal mould for glass bottle production is estimated using photogrammetry. Several different methods, cameras and sensors were used for the 3D reconstruction of the mould's surface. Due to the metal surface of the mould and the issues the metal surface presents for some 3D surface reconstruction methods, the mould surface was painted white. Painting the mould improved the 3D surface reconstruction process and consequently enabled volume estimation. The mould's volume was approximated by summing smaller volumes. The most accurate method had an error of more than 1 mL, while the least accurate had an error of over 20 mL.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:168:938385
Study programmeTitle: Computing
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka računarstva (magistar/magistra inženjer/inženjerka računarstva)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Public note
Created on2024-10-12 21:27:00