Izrada sustava hlađenja za hibridni naponsko-toplinski sunčani kolektor

master's thesis

• Title (english): Constructing the cooling system for hybrid photovoltaic-thermal solar collector
• Author: Mate Čagalj
• Mentor: Viktor Šunde (mentor)
• Committee member: Viktor Šunde (predsjednik povjerenstva)
• Committee member: Željko Jakopović (član povjerenstva)
• Committee member: Fetah Kolonić (član povjerenstva)
• Granter: University of Zagreb; Faculty of Electrical Engineering and Computing; Zagreb
• Defense date and country: 2015-07-16, Croatia
• Scientific / art field, discipline and subdiscipline: TECHNICAL SCIENCES; Electrical Engineering

Abstract

U radu su opisani hibridni naponsko-toplinski sustavi s vodom i zrakom kao rashladnim sredstvom, te detaljni opisi njihovih sastavnih komponenata. Razvijen je simulacijski model direktnog i indirektnog protoka rashladnog fluida u sustavu, koji se temeljio na energetskim bilancama fotonaponskog modula, sunčanog kolektora i toplinskog spremnika. U simulacijskom modelu je uzeto u obzir uvjetovano uključivanje crpke, što je ovisilo o temperaturama vode u kolektoru i toplinskom spremniku, te održanju željene temperature potrošne tople vode u spremniku ili temperaturi fotonaponskog modula. Promatran je utjecaj izvedbe sustava (direktni i indirektni protok), toplinske stratifikacije u sustavu, ozračenosti i radne temperature fotonaponskog modula na dinamiku promjene temperature u toplinskom spremnika, te električnu i toplinsku djelotvornost sustava.
Također je opisan sustav za mjerenje temperature hibridnog naponsko-toplinskog sustava izrađenog na Fakultetu elektrotehnike i računarstva u Zagrebu, koji je uspješno montiran na PV/T sustav koji je također ručno izrađen na FER-u. Sustav za mjerenje temperature koristio je Bluetooth^TM tehnologiju i 1-wire temperaturne sonde. Sustavom je upravljano pomoću LabVIEW aplikacije.
Mjereno je devet točaka temperature na stražnjoj strani fotonaponskog modula, temperatura vode na izlazu iz kolektora i temperatura u spremniku vode. Promatrano je kako temperatura modula utječe na električnu i toplinsku djelotvornost sustava, te na maksimalnu izlaznu snagu. Mjerenja temperature na izlazu iz kolektora i u spremniku su korišteni za izračunavanje toplinske djelotvornosti sustava. Izlazni napon i struja trošila spojenog na fotonaponski modul korišteni su prilikom izračunavanja električne djelotvornosti sustava.

Abstract (english)

This paper describes a hybrid photovoltaic-thermal systems with water and air as a coolant, with detailed description of the components of which PV/T system consists . Simulation model of PV/T system with direct or indirect fluid flow is developed in Matlab/Simulink. The model is based on energy balances of photovoltaic module, solar collector and heat storage tank. Conditional activation of the pump is taken into account, which is dependent on the temperature of water in the collector and storage tank, and maintaining the desired temperature of domestic hot water in storage tank or photovoltaic module. The influence of system performance (direct and indirect flow), the thermal stratification in the system, radiation and the operating temperature of the photovoltaic cells on the dynamics of temperature changes in the thermal tank, and electrical and thermal efficiency of the system are observed.
The system for measuring the temperature of hybrid photovoltaic-thermal system was elaborated at the Faculty of Electrical Engineering and Computing in Zagreb, and was successfully mounted on PV / T system also handmade in FER. The system is using a Bluetooth^TM technology and 1-wire temperature sensors. The system is controlled by using a LabVIEW application.
Nine-point temperature on the back of the PV module, the water temperature at the outlet of the collector and the temperature in the water tank were measured. It was observed how the temperature of the module affects the electrical and thermal efficiency of the system, and the maximum power output. Temperature measurements at the outlet of the collector and the tank were used to calculate the thermal efficiency of the system. Output voltage and load current connected to the photovoltaic module were used in calculating the electrical efficiency of the system.

• Keywords: hibridni naponsko-toplinski sustav; sunčana ćelija; temperatura; električna djelotvornost; toplinska djelotvornost; direkni sustav protoka; indirektni sustav protoka
• Keywords (english): hybrid photovoltaic-thermal system; solar cell; temperature; electrical efficiency; thermal efficiency; direct flow system; indirect flow system
• Language: croatian
• URN:NBN: urn:nbn:hr:168:341167
• Study programme: Title: Electrical Engineering and Information Technology; Study programme type: university; Study level: graduate; Academic / professional title: magistar/magistra inženjer/inženjerka elektrotehnike i informacijske tehnologije (magistar/magistra inženjer/inženjerka elektrotehnike i informacijske tehnologije)
• Type of resource: Text
• File origin: Born digital
• Access conditions: Closed access
• Created on: 2018-02-06 08:15:26